BRMFT - ISOPROPYL ALCOHOL
- MSDS: BRMFT
- Manufacturer: VAN WATERS AND ROGERS INC
- Product Name: ISOPROPYL ALCOHOL
- National Stock Number: 6505-00-261-7256
Product Identification
Product ID:ISOPROPYL ALCOHOL
MSDS Date:02/24/1993
FSC:6505
NIIN:00-261-7256
MSDS Number: BRMFT
Responsible Party
KIRKLAND, WA 98033
US
Emergency Phone: 206-889-3712
Info Phone: 206-889-3712
Cage: 0STM5
Contractor
Telephone: 425-889-3400/425-889-3617
Cage: 0STM5
Ingredients
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
Hazards
LD50 LC50 Mixture:ORAL LD50 (RAT) = 5840 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION-MAY CAUSE IRRITATION OF THE
NOSE & THROAT. EXPOSURE TO HIGH CONCENTRATIONS HAS A NARCOSIS
EFFECT. INGESTION-MAY CAUSE DROWSINESS, UNCONSCIOUSNESS & DEATH.
SKIN-CAN CAUSE IRRITATION. EYE-VAP ORS MAY IRRITATE THE EYES.
SPLASHES MAYCAUSE SEVERE IRRITATION, POSSIBLE CORNEAL BURNS & EYE
DAMAGE.
Explanation of Carcinogenicity:THIS CHEMICAL IS NOT LISTED AS HAVING
ANY EVIDENCE OF BEING CARCINOGENIC.
Effects of Overexposure:INHALATION-MAY PRODUCE SYMPTOMS OF DROWSINESS,
HEADACHE, STAGGERING, UNCONSCIOUSNESS & POSSIBLY DEATH.
INGESTION-GASTROINTESTINAL PAIN, CRAMPS, NAUSEA, VOMITING, &
DIARRHEA MAY RESULT. SKIN-MAY CAUSE IRRITATION WITH A STINGING
EFFECT & BURNING SENSATION.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING SKIN
DISORDERS, EYE PROBLEMS, OR IMPAIRED RESPIRATORY FUCTION MAY BE
MORE SUSCEPTIBLE TO THE EFFECTS OF THIS SUBSTANCE.
First Aid
First Aid:INHALATION-REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE CPR.
IF BREATHING IS HARD, GIVE OXYGEN. CALL PHYSICIAN. INGESTION-GIVE
WATER TO DRINK. INDUCE VOMITING IF MEDICAL HELP IS NOT AVAILABLE.
GET MEDI CAL ATTENTION. SKIN-REMOVE SOILED CLOTHING. WASH SKIN WITH
SOAP OR MILD DETERGENT & WATER. EYE-WASH EYES WITH PLENTY OF WATER
FOR AT LEAST 15 MIN. GET MEDICAL ATTENTION IMMEDIATELY.
Fire Fighting
Flash Point Method:CC
Flash Point:53.0F,11.7C
Autoignition Temp:Autoignition Temp Text:UNKNON
Lower Limits:2
Upper Limits:12
Extinguishing Media:WATER SPRAY, DRY CHEMICAL, ALCOHOL FOAM, OR CARBON
DIOXIDE. WATER SPRAY MAY BE USED TO KEEP FIRE EXPOSED CONTAINERS
COOL
Fire Fighting Procedures:IN THE EVENT OF A FIRE, WEAR FULL PROTECTIVE
CLOTHING & NIOSH APPROVED SELF-CONTAINED BREATHING APPARATUS WITH
FULL FACEPIECE OPERATED IN THE PRESSURE DEMAND.
Unusual Fire/Explosion Hazard:ABOVE FLASH POINT, VAPOR-AIR MIXTURES ARE
EXPLOSIVE WITHIN FLAMMABLE LIMITS. CONTACT WITH STRONG OXIDIZERS
MAY CAUSE FIRE OR EXPLOSION.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE AREA
OF LEAK OR SPILL. SMALL SPILLS MAY BE ABSORBED ON PAPER TOWELS &
EVAPORATED IN A FUME HOOD. ALLOW ENOUGH TIME FOR FUMES TO CLEAR
HOOD, THEN IGNITE PAPER IN A SUITABLE LOCATION AWAY FROM
COMBUSTIBLES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:PROTECT AGAINST PHYSICAL DAMAGE. STORE
IN A COOL, DRY WELL-VENTILATED LOCATION, AWAY FROM ANY AREA WHERE
FIRE HAZARDS MAY BE ACUTE.
Other Precautions:STORGAE: OUTSIDE OR DETACHED STORAGE PREFERRED.
SEPERATE FROM OXIDIZING MATERIALS. CONTAINERS SHOULD BE BONDED AND
GROUNDED FOR TRASNFERRING TO AVOID STATIC SPARKS. STORAGE & USE
AREAS SHOULD BE NO SM OKING AREAS. USE NON-SPARKING TOOLS.
Exposure Controls
Respiratory Protection:IF THE TLV IS EXCEEDED A FULL FACEPIECE CHEMICAL
CARTRIDGE RESPIRATOR MAY BE WORN. ALTERNATIVELY, A SUPPLIED AIR
FULL FACEPIECE RESPIRATOR OR AIRLINED HOOD MAY BE WORN.
Ventilation:A SYSTEM OF LOCAL&/OR GENERAL EXHAUST IS RECOMMENDED.
Protective Gloves:WEAR IMPERVIOUS GLOVES.
Eye Protection:USE CHEMICAL SAFETY GOGGLES/FACE SHIELD.
Other Protective Equipment:WEAR IMPERVIOUS PROTECTIVE CLOTHING,
INCLUDING BOOTS, GLOVES, LAB COATS, APRON OR COVERALLLS TO PREVENT
SKIN CONTACT.
Work Hygienic Practices:WASH THOROUGHLY AFTER USING PRODUCT.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:180F,82C
Melt/Freeze Pt:M.P/F.P Text:-128F,-89C
Vapor Pres:33
Vapor Density:2.1
Spec Gravity:0.79
Evaporation Rate & Reference:2.63 (BUTYL ACETATE=1)
Solubility in Water:INFINITE IN WATER.
Appearance and Odor:CLEAR, COLORLESS LIQUID, RUBBING ALCOHOL ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACETADEHYDE, CHLORINE, ETHYLENE OXIDE, HYPOCHOROUS
ACID, ISOCYANATES, OLEUM & PERCHLORIC ACID.
Stability Condition to Avoid:HEAT AND SUNLIGHT CAN CONTRIBUTE TO
INSTABILITY.
Hazardous Decomposition Products:TOXIC GASES & VAPORS SUCH AS CARBON
MONOXIDE MAY BE RELEASED IN A FIRE INVOLVING ISOPROPYL ALCOHOL.
Disposal
Waste Disposal Methods:ENSURE COMPLIANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.